Technical specifications for 146055-05-02-05

Description

Part Number: 146055-05-02-05
Model:3300 Ceramic Capped Reverse Mount Probes
Manufacturer: Bently Nevada
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information
146055-AA-BB-CC
146055 :3/8-24 UNF threads
A: Total Length Option: -05 =0.5 meter (1.6 feet)
B: Connector and Cable-Type Option: 0 2=
Miniature ClickLoc coaxial connector, standard cable
C: Agency Approval Option: -05=Multiple Approvals

Probe Case Thread:3/8-24
Maximum Length of Thread
Engagement
0.563 in

Probe Nominal DC Resistance
Probe Length 0.5
Resistance from the Center
Conductor to the Outer
Conductor (ohms)
7.45 ± 0.50

Unless otherwise noted, the following
specifications are for a 3300 5 mm system
including Proximitor Sensor, extension cable
and probe between +18°C and +27°C (+64°F to
+80°F), with a -24 Vdc power supply, a 10 kW
load, and an AISI 4140 steel target. Performance
characteristics apply to systems that consist
solely of 3300 XL components. The system
accuracy and interchangeability specifications
do not apply when using a transducer system
calibrated to any target other than our AISI 4140
steel target.

Linear Range
1.52 mm (60 mils). Linear
range begins at
approximately 0.25 mm (10
mils) from target and is
from 0.25 to 1.78 mm (10 to
70 mils) (approximately –4
to –16 Vdc).

Incremental Scale Factor (ISF)
Standard
5-metre or
9-metre system
7.87 V/mm (200 mV/mil)
±6.5% including
interchangeability error
when measured in
increments of 0.25 mm (10
mils) over the 60 mil linear
range from 0°C to +45°C
(+32°F to +113°F).
Mechanical
Probe Tip
Material
Alumina ceramic (Al2O3
)
Probe Case
Material AISI 304 stainless steel.
Probe Cable Specifications
Standard
cable
75 Ω coaxial, fluoroethylene
propylene (FEP) insulated probe
cable in the following total
probe lengths: 0.5, 1, 2, 5, or 9
meters.
Probe Temperature Range
Operating and
Storage
Temperature
-51°C to +177°C (-60°F to
+351°F)
Probe
Pressure
Rated to seal 34 Bar (500 psi)
nitrogen. Modifications are
available for higher-pressure
applications. Contact our
custom design department if
you require a test of the
pressure seal for your
application.

Temperature Schedule
Temperature
Classification
Ambient Temperature
(Probe Only)
For EPL Ga and Gc
T1 -55°C to +232°C
T2 -55°C to +177°C
T3 -55°C to +120°C
T4 -55°C to +80°C
T5 -55°C to +40°C
For EPL Dc
T280°C @ Ta -55°C to +232°C
T225°C @ Ta -55°C to +177°C
T170°C @ Ta -55C to +120°C
T130°C @ Ta -55°C to +80°C
T105°C @ Ta -55°C to +100°C
T90°C @ Ta -55°C to +40°C